Piling & Site Preparation Services for Villas in Pattaya & Huai Yai
Soil Testing & Pile Design
Our piling and site preparation services begin with soil testing to determine ground conditions and piling requirements for each individual project. Soil samples are taken by drilling a core cylinder from the site and sent to a laboratory in Bangkok for analysis.
​
The soil test results are used to determine the depth required for piles to reach stable load-bearing layers, including hard soil or rock. Pile diameter and structural requirements are calculated based on both the soil conditions and the size, weight, and layout of the proposed building.
​
This process ensures that pile design is specific to the site rather than based on assumptions, reducing the risk of settlement, movement, or long-term structural issues.
Reinforced Concrete Piling Works
Following soil testing and pile design, piling works are carried out by drilling pile shafts to the required depth and diameter as defined by the test results. All piles are reinforced using properly sized steel cages and poured with correctly mixed concrete suitable for structural use.
​
Concrete is placed carefully to ensure full compaction and continuity within the pile shaft, forming a solid load-bearing connection between the structure and stable ground layers below. Proper curing methods are applied to allow the concrete to achieve its designed strength.
​
Reinforced concrete piling provides long-term stability and helps prevent structural movement, tilting, or settlement caused by soft ground conditions, groundwater, or heavy seasonal rainfall common in Thailand. The piles are then connected to the footings and the overall foundation.
Frequently Asked Questions
Why is soil testing required before piling?
​
Soil testing identifies ground conditions and load-bearing layers. Test results are used to determine pile depth and diameter to ensure structural stability and prevent settlement or movement.
​
How is soil testing carried out?
​
Soil testing is performed by drilling a core sample from the site and sending it to a laboratory for analysis. The results are used to design piling based on actual ground conditions.
​
What determines the size and depth of concrete piles?
​
Pile size and depth are determined by a combination of soil test results and the size, weight, and layout of the building being constructed.
​
Why is piling important for buildings in Thailand?
​
Piling helps prevent structural movement caused by soft soil, groundwater, and heavy seasonal rainfall by transferring building loads to stable ground layers below.
​
What materials are used for reinforced concrete piles?
​
Reinforced concrete piles are constructed using steel reinforcement cages and concrete mixed to appropriate structural strength requirements to ensure load-bearing capacity and durability.
​
Are pile caps required for all piling systems?
​
Yes. Pile caps are used to connect individual piles and distribute building loads evenly from the structure above to the piles below.
​
Can piling depth vary across the same construction site?
​
Yes. Piling depth can vary depending on soil conditions across the site, as determined by soil testing, to ensure each pile reaches a stable load-bearing layer.
​
Related Services
​